✨ New Arrivals Just Dropped!Explore
HomeStore
2006-2013 Lexus IS250/IS350/ISF Bass Package - Custom Single 10" Amplified Subwoofer Enclosure with Line Out Converter and Wiring Kit - PBK-LEX-IS0613-VCW104
2006-2013 Lexus IS250/IS350/ISF Bass Package - Custom Single 10" Amplified Subwoofer Enclosure with Line Out Converter and Wiring Kit - PBK-LEX-IS0613-VCW104
NVX Loaded BOOST Box - 2006-2013 Lexus IS250/IS350/ISF - BE-LEX-IS0613-VCW104
For select 2006-2013 vehicles from Lexus - Single 10" 1000W RMS Loaded BOOST Sealed Enclosure
Quantity: 1
Product Details:
- Custom-Fit Sealed BOOST enclosure with 1 10" VC Series Subwoofer
- Compatible with select 2006-2013 vehicles from Lexus
- Made with a hand-laid fiberglass shell covered in Carpet
- Enclosure finish matches the interior of your vehicle
- Installs easily into the driver's side of the trunk
- Loaded with one 10" NVX VCW104v3 subwoofer
- Power Handling:
- Peak: 2000 watts
- RMS: 1000 watts
- Final Impedance: 2-ohm
- Carbon Fiber Enhanced Non-Pressed Paper Cone
- Custom High Roll Foam surround with black nylon stitching
- Die cast aluminum vented basket
- Dual progressive roll bolt-on spiders with flat braided tinsel leads
- 3" 4-layer high temperature black aluminum voice coil
- Optimized high-velocity pole vent
- One piece T-yoke with vented magnet gap
- 165 oz. Triple-stacked high-energy ferrite (Y35 grade) magnet
- Custom-molded rubber magnet boot included
- Complete amplified bass system package available here
- Unloaded enclosure also available here
- Installation guide here
- Frequency Response: 20 - 220 Hz
- Sensitivity: 82 dB
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Warning: Does not work with convertible models.
BDA7501
Product Details:
- BD-Series Monoblock Class D Car Amplifier
- RMS Power Rating:
- 4 ohms: 450 watts x 1 chan.
- 2 ohms: 750 watts x 1 chan.
- Wired remote bass level control included
- Variable Bass Boost (0 to +18 dB bass boost at 50 Hz)
- Mono channel operation
- Variable low-pass filter (50-250 Hz, 24 dB/octave)
- Subsonic filter (24 dB at 15 Hz)
- Frequency Response: 20-500 Hz
- Signal to Noise Ratio: 90dB
- Input Sensitivity: .25-6.0 V
- High-quality platinum finish connections provide solid electrical connection and resist corrosion
- Integrated overload, short circuit, thermal and reverse polarity circuit protection
- 4 gauge power and ground wiring is required for installation
- Dimensions: 7"W x 9.75"L x 2"H
- 1-year Warranty from the Original Purchase Date
XLACA2X
Product Details:
- Active 2-channel line output converter and line driver
- Designed to work with factory and aftermarket audio systems
- Speaker-level inputs handle up to 30V (225 watts RMS)
- Low-level RCA inputs handle 150 mV - 2 Volts
- RCA outputs Provide up to 9.5 Volts of output
- Adjustable xBOOST corrects for bass roll-off
- Auto turn-on via DC offset or Audio Detection
- Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
- 12 Volt turn-on output for aftermarket amplifiers
- Selectable Ground Isolation switch to eliminate ground and alternator noise
- Molex terminals for speaker signal and power
- Wired remote bass level control included
- LED Clip indicator
- Total Harmonic Distortion: 0.001%
- Signal to Noise: >105 dB
- Frequency Response: 10-25,000 Hz
- 1-year Warranty from the Original Purchase Date
XKIT42
Product Details:
- 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
- Designed for car audio systems up to 1500 watts RMS
- Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer
- Tinned conductors for corrosion resistance
- Pre-installed black nylon mesh covering protects power wire from being damaged
- Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high-powered systems
- Pre-terminated seamless power and ground ring terminals provide reliable performance
- Full Spec cables meet or exceed the American Wire Gauge standards
- Strand Count: 1862
- CEA-2015 and BC5W2 Compliant
- 1-year Warranty from the Original Purchase Date
$271.95
Original: $776.99
-65%2006-2013 Lexus IS250/IS350/ISF Bass Package - Custom Single 10" Amplified Subwoofer Enclosure with Line Out Converter and Wiring Kit - PBK-LEX-IS0613-VCW104—
$776.99
$271.95
Description
NVX Loaded BOOST Box - 2006-2013 Lexus IS250/IS350/ISF - BE-LEX-IS0613-VCW104
For select 2006-2013 vehicles from Lexus - Single 10" 1000W RMS Loaded BOOST Sealed Enclosure
Quantity: 1
Product Details:
- Custom-Fit Sealed BOOST enclosure with 1 10" VC Series Subwoofer
- Compatible with select 2006-2013 vehicles from Lexus
- Made with a hand-laid fiberglass shell covered in Carpet
- Enclosure finish matches the interior of your vehicle
- Installs easily into the driver's side of the trunk
- Loaded with one 10" NVX VCW104v3 subwoofer
- Power Handling:
- Peak: 2000 watts
- RMS: 1000 watts
- Final Impedance: 2-ohm
- Carbon Fiber Enhanced Non-Pressed Paper Cone
- Custom High Roll Foam surround with black nylon stitching
- Die cast aluminum vented basket
- Dual progressive roll bolt-on spiders with flat braided tinsel leads
- 3" 4-layer high temperature black aluminum voice coil
- Optimized high-velocity pole vent
- One piece T-yoke with vented magnet gap
- 165 oz. Triple-stacked high-energy ferrite (Y35 grade) magnet
- Custom-molded rubber magnet boot included
- Complete amplified bass system package available here
- Unloaded enclosure also available here
- Installation guide here
- Frequency Response: 20 - 220 Hz
- Sensitivity: 82 dB
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Warning: Does not work with convertible models.
BDA7501
Product Details:
- BD-Series Monoblock Class D Car Amplifier
- RMS Power Rating:
- 4 ohms: 450 watts x 1 chan.
- 2 ohms: 750 watts x 1 chan.
- Wired remote bass level control included
- Variable Bass Boost (0 to +18 dB bass boost at 50 Hz)
- Mono channel operation
- Variable low-pass filter (50-250 Hz, 24 dB/octave)
- Subsonic filter (24 dB at 15 Hz)
- Frequency Response: 20-500 Hz
- Signal to Noise Ratio: 90dB
- Input Sensitivity: .25-6.0 V
- High-quality platinum finish connections provide solid electrical connection and resist corrosion
- Integrated overload, short circuit, thermal and reverse polarity circuit protection
- 4 gauge power and ground wiring is required for installation
- Dimensions: 7"W x 9.75"L x 2"H
- 1-year Warranty from the Original Purchase Date
XLACA2X
Product Details:
- Active 2-channel line output converter and line driver
- Designed to work with factory and aftermarket audio systems
- Speaker-level inputs handle up to 30V (225 watts RMS)
- Low-level RCA inputs handle 150 mV - 2 Volts
- RCA outputs Provide up to 9.5 Volts of output
- Adjustable xBOOST corrects for bass roll-off
- Auto turn-on via DC offset or Audio Detection
- Load selection switch (20, 60, or 20K ohms) to prevent factory stereo shut-down
- 12 Volt turn-on output for aftermarket amplifiers
- Selectable Ground Isolation switch to eliminate ground and alternator noise
- Molex terminals for speaker signal and power
- Wired remote bass level control included
- LED Clip indicator
- Total Harmonic Distortion: 0.001%
- Signal to Noise: >105 dB
- Frequency Response: 10-25,000 Hz
- 1-year Warranty from the Original Purchase Date
XKIT42
Product Details:
- 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
- Designed for car audio systems up to 1500 watts RMS
- Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer
- Tinned conductors for corrosion resistance
- Pre-installed black nylon mesh covering protects power wire from being damaged
- Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high-powered systems
- Pre-terminated seamless power and ground ring terminals provide reliable performance
- Full Spec cables meet or exceed the American Wire Gauge standards
- Strand Count: 1862
- CEA-2015 and BC5W2 Compliant
- 1-year Warranty from the Original Purchase Date
